Data Act Information

Pre-contractual information pursuant to Article 3(2) and (3) of the EU Data Act

As manufacturers of connected products and providers of related services within the meaning of Regulation (EU) 2023/2854 (Data Act, “DA”), SMA Solar Technology AG and its affiliated companies within the SMA Group that place products on the market or offer services in the EU (together, “SMA”) provide the following information. A complete list of affiliated companies can be found in the most recent annual report, available at
https://www.sma.de/en/investor-relations/publications. Section 1 contains information on SMA connected products and Section 2 contains information on SMA related services.

Information specifically relating to the processing of personal data can be found https://www.sma.de/en/data-protection-declaration.

Mandatory information on connected products (Article 3(2) DA)

SMA offers inverters, system solutions, electricity storage systems and charging solutions that qualify as connected products under the DA. These products generate, in particular, measurement, status, event, diagnostic and configuration data during their use. The scope and specific nature of the data generated depend in particular on the relevant product model, firmware version, system layout, and activated interfaces and functions.

Under the EU Data Act, the party that sells, rents or leases the product to you is required to provide the pre-contractual information. If you purchase an SMA product directly from SMA, SMA will provide you with the information set out below. If you purchase the product through an authorised sales partner, that partner, as the seller, is required to provide this information; SMA makes the information required for this purpose available to sales partners.

Nature, format and estimated volume of product data (Article 3(2)(a) DA)

The nature, format and estimated volume of product data depend on the product category, as set out below.

Product category

Nature

Format

Volume

PV Inverters

(e.g. Sunny Tripower 125)

Measurement, operating, status, event and diagnostic data, including in particular AC/system active power, reactive power, voltages, currents at the grid connection point, energy fed into the grid (daily/total), operating statuses and error codes.

Structured numerical measurement, status and event data, typically in the form of register, telemetry and time-series data. Depending on the configuration, data are provided in particular via Modbus TCP, Speedwire, and local system or portal interfaces.

Continuous or regular generation of measurement and status data. With typical Modbus polling intervals of approximately one second or more, several hundred thousand measurements per day may be generated, depending on the number of data points queried.

Hybrid Inverters

(e.g. Sunny Boy Smart Energy; Sunny Tripower Smart Energy)

In addition to solar inverter data, battery-related operating, status and power data, including in particular battery state of charge and charging and discharging power.

Structured numerical measurement, status and time-series data; typically provided via Modbus TCP, Speedwire, energy management systems and portals.

Continuous or regular generation of inverter, battery and status data at a frequency similar to that of solar inverters.

Battery inverters

(e.g. Sunny Boy Storage, Sunny Island X)

Battery, operating, status, control and protection data, including in particular battery status, battery condition, active power limits and protection parameters (e.g. deep discharge protection).

Structured measurement, control, status and diagnostic data, typically in the form of register and time-series data via Modbus TCP.

Continuous or regular generation of battery and status data; the volume depends on the operating mode, storage capacity and system configuration.

Battery storage system

(e.g. SMA Home Storage)

Storage and battery system data, including in particular charging and discharging status, battery status, and operating and status data within the overall system.

Structured battery, status and system data; typically integrated and processed through connected inverter, energy management and portal systems.

Ongoing generation of status and operating data within the system network; the volume depends on the number of battery modules, use and system operation.

Charging solutions & wallboxes (e.g. SMA eCharger)

Charging operation, usage, status and energy data, including in particular charging power, usage times, utilisation, integrated energy metering and, where applicable, authorisation data (e.g. RFID).

Structured charging, usage, measurement and event data; provided in particular via portal and energy management systems and, where supported, via OCPP interfaces.

Ongoing or event-based generation of charging, usage and status data during operation and standby; the volume depends on charging behaviour and frequency of use.

Energy management & communication devices (e.g. Data Manager M; Power Plant Manager)

Communication, control, measurement and system data, including in particular device communication and connection status, configuration and management data for connected devices, and forwarded operating and measurement data from connected system components.

Structured control, status, measurement and communication data.

Ongoing generation of communication, control and system status data; the volume depends on the number of connected devices, system size, grid requirements and configuration.

Medium-voltage stations and modular large-scale power plant and conversion systems (e.g. MVPS 2660-5000; Sunny Central FLEX)

Measurement, operating, status, event, diagnostic and protection data generated by the integrated components, in particular inverters, transformers and medium-voltage switchgear. This includes in particular AC/DC power values, voltages, currents, efficiency and error codes, transformer- and medium-voltage-switchgear-related data (e.g. switch positions, protection trips, and temperature and insulation monitoring data), as well as communication and system status data from the optional com-munication/monitoring module.

Structured numerical measurement, status, protection and event data, typically in the form of register and time-series data; depending on the configuration, data are provided via the integrated communication/monitoring unit (e.g. Modbus TCP), a local system visualisation and an optional connection to portal/control systems.

Continuous or regular generation of data from the integrated com-ponents during operation. The volume depends on the power class, product configuration, installed components, activated protection and monitoring functions, and selected communication configuration.

Continuous data generation and real-time availability (Article 3(2)(b) DA)

The products referred to above generate product data continuously and on an event-driven basis. Depending on the product, configuration, firmware version, system environment and selected access method, data may be made available in a highly up-to-date form, up to and including near-real-time availability.

The timeliness of data availability depends in particular on the relevant access method:

  • Local: The primary means of local access for users is the web interface of the relevant device or system. Depending on the product and configuration, current operating values may be displayed there in real time or near real time, as well as historical values.

    Where supported by the relevant device and configured accordingly, product data may additionally be read and technically processed via local technical interfaces, in particular Ethernet and Modbus TCP. Data are retrieved by querying the data points made available via the relevant interface. Access requirements include, in particular, network and device configuration and the required access parameters, e.g. IP addressing, open network ports and, where applicable, role-based or password protection.

  • Portal/cloud: When portal and cloud applications are used, e.g. Sunny Portal or SMA eMobility Portal, product data are transmitted to the relevant service via a connected SMA product and made available there for display, analysis and, where applicable, export.

    Access requirements include a user account and successful assignment of the system or charging infrastructure to that account. Data availability depends on the internet connection, transmission and processing cycles, and availability of the relevant service.

However, not all products, functions, interfaces and data points are available to the same extent in every product generation, firmware version or system configuration.

Storage and retention (Article 3(2)(c) DA)

Depending on the product, system configuration and activated functions, product data may be stored locally in the device or local system network and/or in the portal or cloud.

  • Local: At device or system level, product data are typically stored only for a limited period. Storage may be configured on an overwrite basis, so that older data are replaced by newer data. The specific local retention period depends on the relevant device, system configuration and activated functions and is documented for each product.

  • Portal/cloud: When Sunny Portal is used, intra-day measurement data for standard views are retained for up to five years.

    Extended intraday AC/DC measurements are retained for 30 days where the data are transmitted to the portal by an SMA inverter or an SMA inverter with Webconnect functionality.

    Where the data are transmitted to the portal through an SMA Data Manager or a Sunny Home Manager 2.0, extended intraday AC/DC measurements are retained for 100 days.

    In this case as well, the retention period for standard views is up to five years. Event data are retained in the portal for six months.

    If a system is deleted in the portal, the associated historical system data are irretrievably lost.

The actual retention and storage period for individual data categories may vary depending on product generation, firmware version, system configuration, data source, communication channel and service used.

Access, retrieval and deletion (Article 3(2)(d) DA)

Access to product data depends on the product, system configuration and activated functions:

  • Local: The primary local access point for users is the web interface of the relevant device or system. Depending on the product and configuration, current operating values and historical values may be displayed there.
    Where supported by the relevant device and configured accordingly, product data may additionally be read and technically processed via local technical interfaces. Data are retrieved by querying the data points made available via the relevant interface. Access requirements include, in particular, network and device configuration and the required access parameters, e.g. IP addressing, open network ports and, where applicable, role-based or password protection.

  • Portal and cloud services When portal and cloud applications are used, e.g. Sunny Portal or SMA eMobility Portal, product data are transmitted to the relevant service via a connected SMA product and made available there for display, analysis and, where applicable, export. Access requirements include a user account and successful assignment of the system or charging infrastructure to that account. Data availability depends on the internet connection, transmission and processing cycles, and availability of the relevant service.

Users may request access, free of charge, to product data that are readily available to SMA without disproportionate effort, are held by SMA and were generated during their use of the products, in a structured, commonly used and machine-readable format. Users may also request that those data be transmitted to a third party designated by them. For this purpose, they may contact the details set out in Section 2.5. The scope of data that can be made available depends in particular on the product used, the system configuration, the activated functions and the data sets actually available to SMA.

Deletion

Deletion of historical data may result in particular from the expiry of retention periods, disconnection, deactivation of a service, or deletion of the system or account. With respect to portal-based data, it should be noted that deletion of a system may regularly result in the loss of the associated system data.

The details of deletion depend on the service used in each case, the administrative functions available there, and the applicable deletion and retention policies.

Terms of use and service quality

The use of portal and cloud services is governed by the applicable terms of use. Service quality, in particular availability, timeliness and functional scope, depends on the relevant product or service variant, the data transmission route and technical conditions, in particular network connection, updates and maintenance windows. Restrictions may result in particular from security requirements such as authentication and authorisation, system protection mechanisms, permissible polling frequencies, and specified interfaces and data formats.

Not all data access options are activated by default or available to the same extent for every product.

Mandatory information on related services (Article 3(3) DA)

SMA provides its customers with access to various digital services, including related services, through Sunny Portal, the SMA Energy App, SMA eMobility Portal and other applications. Sunny Portal not only enables device data to be read, but also enables data to be analysed, stored and aggregated and, to a limited extent, connected products to be configured. The SMA Energy App provides access to data from connected products, such as inverters, as well as vehicle charging data, enabling intelligent control of charging processes. SMA eMobility Portal enables charging infrastructure to be analysed and usage to be assessed; it qualifies as a related service only where and to the extent that control functions are activated for the relevant charging station. Further details on the services can be found in the following sections.

Product data received by the service: nature, frequency, access, storage and retention (Article 3(3)(a) DA)

The relevant service receives product data from the connected products. These may include, in particular, measurement, operating, status, event, diagnostic and configuration data. The nature, format, estimated volume and information on the timeliness of product data are set out in Section 1. The estimated volume of product data transmitted to the relevant service depends in particular on the number of connected products, the data points supported by the relevant service and the transmission frequencies. Depending on the product, firmware version, system configuration and activated functions, the service may process and display the product data supported by the relevant service.

Service

Nature of product data

Frequency of collection of product data

Storage & retention period of product data

Sunny Portal (powered by ennexOS)

Measurement, operating, status, event, diagnostic and configuration data from connected inverters, storage systems and other system components (see Section 1).

Webconnect devices: cyclically, typically approximately every 15 minutes; active device transmission: typically approximately every 5 minutes; live data: approximately every 5 seconds (not stored).

Standard views: up to 5 years; extended AC/DC measurement data: 30 days (Webconnect) or 100 days (Data Manager / SHM 2.0); event data: 6 months; deletion of the system results in the irretrievable loss of system data.

Energy App (intelligent charging function)

PV generation data (power, yield), battery state of charge and power, status and charging power of the SMA eCharger / EV Charger, grid consumption and feed-in; PV surplus as the basis for controlling charging processes.

Live data are retrieved continuously during active use of the app; data are retrieved via the Sunny Home Manager and Sunny Portal backend; historical data are available on demand.

System data are stored on SMA servers in Germany and retained through Sunny Portal; retention periods correspond to those of Sunny Portal.

SMA eMobility Portal, a related service only where and to the extent that control functions are activat-ed for the relevant charging station

Real-time status data of charging stations (connection and charging-point status), charging-session data (start/end time, charged energy amount, authorisation identifier / RFID), device identifiers (serial number, OCPP ID, EVSE ID), diagnostic data; where control functions are activated, also control and feedback data.

Status data and charging sessions are transmitted in real time on an event- and status-driven basis (OCPP); where control functions are activated, also where required to carry out control operations.

Charging-session data (transactions, including energy amounts and timestamps) are stored for billing and analysis purposes; the specific retention period is documented for each product; a device must be deactivated rather than deleted to prevent data loss.

Access

Access to product data processed within the service is provided through the relevant user account and the designated role and rights concepts (e.g. system assignment and user management).

Irrespective of this, users may exercise data access rights in accordance with applicable statutory provisions, in particular the Data Act, including the transmission of product data to a designated third party.

Storage/retention

Product data are stored in the service where necessary for display, analysis, reports and the provision of functions. The specific retention periods and deletion effects in portal/cloud operation (including deletion of the system in the portal) are set out in Sections 1.3 and 1.4.

Related service data: nature, volume, access, storage and retention (Article 3(3)(b) DA)

In addition to product data, related services generate and process related service data, including in particular administrative, usage, configuration, analysis and operational data, as well as metadata required to interpret product data.

Typical categories of related service data:

  • Account and registration data for use of the service, e.g. user account/SMA ID, system assignment, and user and role management.

  • Configuration and settings data of the service, e.g. portal, dashboard and notification settings, as well as configurations of reporting and export functions.

  • Usage and interaction data of the service, e.g. login and access logs, times and scope of data retrievals or exports, and administrative and configuration operations initiated by users.

  • Support and communication data, where support or service functions are used, e.g. ticket or request content and processing status.

Volume

The volume of related service data depends in particular on the intensity of use, the number of systems managed, the number of authorised us-ers, the activated functions and user actions performed.

Access

Access to related service data is limited to authorised users in accordance with the applicable role and permission model, and to authorised internal departments and, where applicable, contracted service providers, where necessary for the provision, administration, security or support of the service.

Storage and retention

Related service data may be stored where necessary for the provision and administration of the service, in particular for user management, traceability of user actions, support, error analysis and security purposes.

Generally, data are retained only for as long as necessary for the relevant purposes or where statutory retention obligations apply. Upon termination of use, e.g. by deletion of the account or system assignment, related service data will be deleted or anonymised, where applicable, in accordance with the relevant deletion rules and statutory obligations.

Not all functions or data categories are available to the same extent in every portal or service variant.

Use by SMA and third-party use for agreed purposes (Article 3(3)(c) DA)

SMA expects to use readily available product data and related service data processed in the services referred to in Section 2.1 for the provision, administration and use of those services and the features available in the relevant service. This includes in particular the display and analysis of system and operating data, the preparation of reports and analyses, the configuration and parameterisation of supported functions, user and system management, fault diagnosis and incident resolution, and the technical provision, security and maintenance of the service.

Where necessary, the data may also be used for the further development and improvement of existing functions and services. Data will be used for other purposes only where separately agreed or permitted by law.

Where SMA enables other users or external data recipients to access data within the related services referred to in Section 2.1, SMA does so solely at the user’s request and to the extent specified by the user, e.g. through user authorisations, role and rights assignments or data exports. Third parties may use the data solely for the purposes agreed in each case or authorised by the user.

Identity of the prospective data holder and, where applicable, other data processing parties (Article 3(3)(d) DA)

SMA Solar Technology AG
Sonnenallee 1
34266 Niestetal
Germany

SMA Solar Technology AG is the provider of Sunny Portal and the SMA Energy App and the prospective data holder for product data received and related service data generated in the provision of these services. This also applies where you purchase the connected product from another SMA Group company or a sales partner.

Means of communication for rapid and efficient contact (Article 3(3)(e) DA)

For questions in connection with the Data Act, you can contact SMA using the following contact details:

Telephone: +49-561 95 22-0
info@SMA.de

Arrangements for sharing with third parties and termination (Article 3(3)(f) DA)

Data processed in the related services referred to in Section 2.1 may be shared with third parties in particular by granting users or other third parties access rights in the related services (e.g. through user management and role assignment) or by exporting data from the portal, insofar as the relevant function is supported and the user is authorised to do so.

The specific access rights depend on the role assigned in each case. User management, in particular the creation and deletion of users and the granting or amendment of roles and permissions, is generally reserved for administrators. Users may request that data be shared with a third party by contacting SMA using the contact details set out in Section 2.5.

Data sharing may be terminated at any time, in particular by revoking access rights in the portal (e.g. removing users or changing roles and per-missions) or by deleting the connected products from the related service.

Where connected products are deleted from the related service, the associated system data may be deleted in accordance with the applicable deletion and retention policies. Historical system data will generally no longer be available thereafter.

Right to lodge a complaint under Article 38 DA (Article 3(3)(g) DA)

Users may lodge a complaint with the competent authority in the Member State of their habitual residence, place of work or establishment. In Germany, the Bundesnetzagentur (BNetzA) has been designated as the competent authority and central contact point for complaints in con-nection with the Data Act; it can be contacted at DataAct@BNetzA.de.

Where a complaint concerns the protection of personal data processed by SMA, you may contact the competent data protection supervisory authority. In Germany, the Federal Commissioner for Data Protection and Freedom of Information (BfDI) is responsible for data protection supervision of SMA within the scope of the Data Act.

Notice on trade secrets (Article 3(3)(h) DA)

Certain data processed in the related services referred to in Section 2.1 may, depending on the context of use, contain information that qualifies as trade secrets within the meaning of Directive (EU) 2016/943. This concerns in particular detailed generation, consumption and load profiles, temporal usage patterns, system-specific configuration and performance parameters, and information that may reveal details of operational processes. SMA is the holder of the trade secrets contained in the data insofar as they concern SMA’s own technical information, parameters or analyses.

Access to such data is limited to authorised users and is provided exclusively within the scope of the roles and rights granted by the user. Data are not shared with third parties automatically, but only at your express request (e.g. through user authorisations or data exports). The scope of data that can be made available may be technically limited (e.g. by time resolution or degree of aggregation) in order to ensure the protection of trade secrets. Supporting service providers receive access to data only where necessary for the provision of services and are contractually bound to confidentiality.

Contract term and early termination (Article 3(3)(i) DA)

The contract for the use of the related services remains in force for as long as the user account is actively registered and at least one system is assigned to that user account, subject to the applicable terms of use.

You may terminate use of the related services at any time by deleting your user account or by removing the connected products from the service; deletion of the system results in the irretrievable loss of the associated system data. SMA is also entitled to terminate the contractual relationship ordinarily or extraordinarily in accordance with the applicable terms of use; in the event of termination, the provisions set out therein on data access, data deletion and the continued application of statutory retention obligations shall apply.